 |
HCR Series
Computerized Embroidery Machine
Newly developed Compact Multi-head Embroidery machine HCR series has range of 2 heads till 8 heads. The machine realized low-noise and less-vibration which are required from market and also accept all kind of memory media in the market like USB flash memory, SD card, Smart Media... The machine can work for flat embroidery, tubular embroidery for finished garment and as well as cap embroidery by changing frame setting. |
|
 Download HCR Series catalogue
| Characteristics and Features |
 |
- Multi head 15 colors
- Maximum speed 1,100 r.p.m.(1,000 r.p.m.)
- Maximum Flat Embroidery size 450 x 500mm (360mm)
- Tubular Embroidery Area : 420 x 440mm
- Low-profile cap frame(option) : 70 x 180 mm
- Wide cap frame(option) : 80 x 350 mm
- Free PC connection software
- Machine memory 2,000,000 Stitches, up to 250 design can be saved
- Serial, USB and LAN network port
- USB flash memory port
- Flash memory card slot
- Automatic thread trimmer
- Automatic color change
- Automatic thread break detection
- Built-in bobbin thread winder (option)
- Short stitch sweap function
| HCD Series Features |
|
Trace Mode
Before start embroidering, you can check size of design against frame size set on machine.
Color LCD Control Panel
Color LCD Monitor makes operation easy
and simple. Icons support selecting next
operation and make preparation time short. |
Easy selection of design |
| 
PC Connection
The machine has port for USB and
RS-232C for design data transfer from PC directly. The LAN port is for connection to network function |
USB Host
USB flash momory stick can be used as a media of design data memory |
Media Compatibility
The most popular memory modia in the market
is accepted |
Expantion of Embroidery Area on Cap
Embroidery design can be started 10mm from the brim of cap. |
New Thread Control System
The thread break sensor and the thread
tension control unit are combined which
gives more stability to the upper thread control
|
The independent thread take-up spring improves the quality of sewing. |
Free communication software
Happy LINK: Direct connection with PC and a machine for design transfer
Happy LAN : One PC can control multiple and different type of machines
Machine memory 1,000,000 stitches
2,000,000 stitches and 250 design can be stored into memory of machines as standard. The large memory capacity stores not only designs but setup information for each design. Even large and complex designs are easily handled.
| HCR Series OPTION |
|
Low-profile Cap Frame
Low-profile Cap Frame has embroidery area 70 x 180mm. Cap setting device which is supplied with cap frame makes your preparation job quick and easy.
Wide Cap Frame
Wide Cap Frame has embroidery area 80 x 350mm. It gives possibility to make embroidery up to side of cap. Cap setting device is supplied with cap frame.
Border Frame and Table
Border Frame and Border Frame are used for embroidery of badge, emblem and flat fabric.
| 
Clip Type Upper Thread Holder
The mechanical upper thread holder keep upper threads which are not in operation |
Various Frames
Happy original various type of frames expand your possibility. |
Floppy Disk Drive
Floppy disk can be used as a media of memory |
Bobbin Winder
Bobbin thread winder operates by indepandent small motor and thead can be winded anytime. |
Preparatory Table Ass'y
Preparatory table supports for setting frame on finished garment
Needle Sensor
Needle sensor protects you from unexpected accident
Laser Position Mrker
The laser position marker shows the point of needle, it support your position setting.
This option can be installed on 1st head or all heads
| HCR Series OPTION |
|
Machine Weight and Size
|
Machine Dimentions
 |
 |
Note
-
Sewing area in the specification list shows maximum moving distanc ebu actual sewing may be limited by hoops to be used.
- Specifications are subject to change without notice.
- Maximum machine speed may change by sewing condition.
|
