|
GMI Laser II is a universal device that can can be installed on multi-head machines on any brand or model.
 |
| Advantages |
 |
Some advantages on using laser devices applied to embroidery machines
- Maximum quality of applique cutting with great time saving.
- Much higher speed and precision in cutting, than with traditional methods.
- You can cut the applique at a precise distance from the running stitch (or any other stitch function) so that to get a precise border.
- You can engrave tissues at a very high speed.
- You can produce new embroideries and new effects, as "velvet stitch", floating applique, engravings and much more.
When cutting synthetic fabrics, laser welds fibers, avoiding any eventual fraying. |
| The advanages compared to other laser systems. |
|
- GMI Laser ® can work simultaneously with up to two embroidery machines, one sampling machine and GMI Plotter ® and/or GMI Roller ®.
- GMI Laser ® is much faster, as the laser beam is directed by mirrors with electromagnetic motors. Cutting results therefore to be up to 20 times and engraving up to 50 times faster.
- GMI Laser ® allows for setting up different laser power, speed and number of passages for each cut, which proves particularly useful when working with different materials on the same sample.
- GMI Laser ® cuts with much higher precision (1/100 mm instead of 1/10 mm). Traditional systems keep in fact the laser still and move the pantograph, when cutting. Cutting results therefore unclean and not very precise.
- GMI Laser ® gets rid of, or reduces, all burned edges of the cut piece, thanks to its high cutting speed.
- GMI Laser ® is equipped with a smoke suction system and a protective bell to guarantee complete safety to the operator.
- GMI Laser ® always works with the highest productivity. In standard systems, the maximum speed is limited to the movement of the x and y-axis stepping motors of the pantograph. That way, you have to reduce the laser power, in order to avoid burnings. GMI Laser ® can work with the maximum laser power (100%). By controlling the speed, you will be able to reach the best results.
- GMI Laser ® is very simple to use, thanks to its laser driver control software. It is in fact very easy to set the parameters of laser cutting: power, speed, number of passages,....
|
| Technical Features: |
| Power supply |
220V single phase 50/60 Hz |
|
|
|
| Source, feeder, galvo head |
water cooling |
|
| Max power consumption while cutting |
from 1,3 KW to 3 KW (depending on the source) |
|
| Duration of laser recharge |
25.000 hours |
|
|
| Working field for each head |
The same as embroidery machine, less 20/30 mm in Y |
|
| Max engraving speed |
6000 mm/sec |
|
| Column max speed |
more than 1,6 mt/sec (96 mt/min) |
|
| Control software |
Stilista Laser Driver - Stilista 2000 |
|
|
Installation Solutions: |
|
 |
| GMI Laser II installed on a multihead embroidery machine. |
 |
| GMI Laser II installed on 2 multihead embroidery machines. |
|
|
