|
BE-1204B
12 Needle 4 Head
Embroidery Machine
 |
BE-1206B
12 Needle 6 Head
Embroidery Machine
 |
Optimized thread tension ensures that finishes are always stable and attractive. Total cycle time is shorter, and these models are ideal for both multi-variety small-lot production and small-variety large-lot production. |
|
Features |
 |
 |
 |
Increased productivity
Cycle times have been reduced.
Unnecessary feeding after thread trimming has been eliminated and the time taken for thread trimming has been reduced. In addition, color change is also carried out at high speed, so that total cycle time has been reduced by about 5% (compared to previous Brother products).
Switching between flat frames and cap frames is simple.
There is no need to replace the needle plate or adjust the presser foot height when replacing frames, so overall setup time has been greatly reduced. Installing and removing the cap frame driver is also simplified.
Reduced downtime, with thread breakages and thread tangling prevented before they occur.
Highly-sensitive upper thread breakage sensors which monitor lower thread breakages as well are equipped as standard, so that if a thread breakage occurs or bobbin runs out, it is detected straight away. This keeps downtime to an absolute minimum.
Rotary hooks that reduce the load placed on the threads have been adopted. In addition, an optimized thread take-up mechanism has also been adopted to prevent thread breakages.
A thread take-up cover is provided to accurately prevent the thread tangles around the take-up levers. |
Stable and attractive finishes are provided.
The adoption of a thread take-up mechanism that has been optimized to provide the ideal thread tightness and a high-precision feed control mechanism provide stable seam tightness under an even wider range of conditions so that high-quality finishes can always be obtained. Newly-developed double-capacity rotary hooks ensure stable thread tightness, and correct thread tensions can be obtained for light through to heavy materials. |
Short thread remaining lengths
The thread trimming knife is located as close to the needle plate as possible. The thread remaining length underneath the material is approx. 6 mm short. Because the thread remaining length is so short, the thread does not need to be manually trimmed. |
Low vibration and low noise
A reduction in jump noise means that vibration has been greatly reduced, and at the same time operation is much quieter overall. |
Flexible respone to customer needs (computer control type)
Machines can be combined to meet customer needs.
A single computer can control maximum four units. These four units can be operated independently at the same time, which is ideal for large-variety small-lot production runs and for producing different items at the same time. It also allows productivity to be greatly increased.
4 head and 6 head embroidery machines can also be combined, so that you can select the number of heads -- for example, 8 heads (4 + 4), 10 heads (6 + 4) or 12 heads (6 + 6) -- in accordance with your needs.
Computer control allows centralized control.
The progress of embroidering jobs are displayed on the computer screen. Details such as number of stitches, job progress, embroidering speed and speed ranges are visible in real time.
Production statistics can also be collated to provide information for better production control. The information can also be displayed in graphs by using commercially-available graph plotting software.
Embroidery patterns can be classified and stored in separate folders.
Stand-alone type is also available for operating machines individually without computer. |
 |
|
Options & Accessories |
|
Border frame |
Tubular frame |
Cap frame |
 |
|
Bobbin winder
The bobbins can be wound either while embroidering is in progress or while the machine is stopped.
Height adjustable table
When using a tubular frame or cap frame, the table can simply be lowered without needing to be removed. (Available soon)
Bobbin winder
Spider net frame |
BES-300N
Intergrated network system
Multiple embroidery machines are connected together for more efficient management. (Distribution of embroidery data, Centralized database management, Real-time monitoring of embroidery machines, Generation of production reports). Only stand-alone embroidery machines can be connected. Computer-controlled machines cannot be connected. |
|
|
