TUKAcut 600/350

TUKAcut 600 and 350 are stand-alone conveyorized cutting machines. There 6sm and 3.5sm compressed CNC machine are equipped with intelligent management and integrated power solutions. Using the latest electronic and mechanical technology, TUKAcut is the ideal choice for use in the apparel, upholstery, automotive and nautical industries.

Features

Cutting Surface & Vacuum
The conveyor cutting surface is a flexible and compact top composed of unique “quad multi-needles’ to facilitate the penetration of the blade and allow the vacuum to be concentrate in the cutting zone. A patented vacuum section canalization distributes the vacuum suction evenly across the entire cutting surface, and a special EVAS (electronic vacuum sensor) optimizes the suction. A sophisticated sensor detects air leakage and adjusts the vacuum automatically while cutting.
                  
Power Saving
Particular attention has been paid to reduce the energy consumption during the operation of the machine.

Self-sharpening Knife
The system includes electronics sharpening of the knife with a single grindstone. Sharpening angle can be changed as necessary for different fabrics (resinous fabrics, fabrics with metallic threads or with particular finishes or dyes.)
Because the wear of the blade is automatically corrected, the blade lasts longer and the cut is always precise and clean.

Facilitated Take-off Conveyor Table
The unloading conveyor is made of rubber cloth which makes picking up cut pieces easier. The unloading conveyor can work either in a synchronized way or it can be controlled separately so that the machine can be unloaded at the same time as a new phase of cutting is starting.

Saving Cutting Time
CSM program (Control step motion) allows a continuous step movement of the conveyor for multiple markers as one cut, thus reducing the setup time and increasing throughput per hour.

Diagnostic and Maitenance
Each component of the system is continuously monitored, and possible anomalies are detected and displayed. The system displays errors and anomalies, making fault detection easier. This allows qualified technicians to provide prompt technical assistance and accurate repairs.

TUKAcut High & Low Ply Cutters

Features

• Windows XP-based operating system with computer, keyboard, touchscreen monitor and mouse.
• Wireless connection with the LAN.
• Simplified graphical user interface.
• Complete management of cut flies.
• Open interface to receive cut data from TUKAcad, ISO, DXF and HP-GL.
• Notch Parameter Management: standard notches, including inner and outer ‘V’ notches.
• Setting and adjustment of linear and reciprocal knife speed.
• Cutting simulation of any single piece for data verification.
• Choice of cutting start point.
• Cutting conveyor with programmable speed and reverse movement.
• Automatic cleaning system of the cutting conveyor.
• Programming of the inner or outer selvedge cut.
• Visualization of cut markers.
• Optimization of cut files, cut path and common lines.
• Visualization of knife wear, with warning for knife replacement.
•  Programmable knife sharpener – Setting of the sharpening angle position.
• Preview of the working sequences and cutting simulation.
• Planning of existing markers and cutting file parameters.
• Laser devise for start point.
• Variable vacuum with automatic adjustments.
• Interactive visualization of the operative parameters: speed and vacuum levels.
• Unique vacuum system with zero maintenance for vacuum bed.
• Air exhaust with tilter and silencer.
• Synchronized or separate movements of the take-off conveyor.
• Integrated drill with interchangeable drill bits.
• Auto-diagnosis system to identify potential errors, with suggested solutions.

Specifications

• Cutting height 6cm / 3.5cm of compressed layer
• Electric requirements: Three phases 400v 50Hz +/- 10%
• Power supply: 20Kw
• Compressed air: Consumption 150L / min 6 BAR
• Cutting speed 60m/l’
• Acceleration 0, 5g
• Rumorosity < 80dbA
• Working temperature: from +10°C to 40°C
• Humidity from 30% to 80%
• Standard cutting windows: 180 x 200cm; 200 x 200cm; 220 x 200cm; 240 x 200cm
• Standard unloading conveyor 160cm. Different cutting window and unloading table measurement available upon request.

Options

• Hot drill
• Lateral motorized travel kit to move the machine between multiple spreading tables
• Cooling device: blade cooling system
• CSM (control step motion: step continuous motion of conveyor)
• FLESE (flexion sensor)
• Barcode reader facilities data marker input in automatic edit/cut software to manage and modify the ISO marker